Tile & Tile Setters

Our CONE 6 TILES are made by a local company using our own Timberline Sculptural clay. When fired to cone 6, it's vitreous and waterproof for outdoor use, and tough enough to hold up under foot traffic. Working with cone 6 glazes opens up whole new worlds of color and design for you as an artist. Especially if you use cone 6 glazes in combination with our wonderful Interactive Pigments ... imagine the possibilities!

Try Making Your Own Tile, Too! Making your own tile from scratch can be fun, fast and easy with our stainless steel, spring-loaded tile cutters. Use your choice of clays for your tiles, and choose from the wide additional selection of shapes and sizes (including octagons and triangles). Click either of these images to visit our Tile Cutters page.

Greenware Cone 6 Timberline Tile

UNFIRED! (Allow about 10% clay shrinkage in bisque firing)
Due to their fragility, HFT4 and HFT6 greenware tile are AVAILABLE IN-STORE ONLY.
We cannot ship them. Bisque fire to cone 04 and fire to cone 6. No refunds.

	HFT4 • $3.25 4x4" Square (actual measure after firing 3.75") Qty:
	HFT6 • $4.50 6x6" Square (actual measure after firing 5.875") Qty:

Bisque Cone 6 Timberline Tile

(bisque fired to cone 04, ready to glaze fire to cone 6)
*** Please order a few extra to accomodate for breakage during shipping and call for availability,
there will be an extra packing charge due to the fragile nature of these tiles.

	BT4HF • $3.75 -- special order - no refunds-- 4" Square (actual measure after firing 3.75 ") Qty:
	BT6HF • $5.00 -- special order - no refunds-- 6" Square (actual measure after firing 5.875") Qty:

Bisque Cone 06 Low Fire Tile

(bisque fired to cone 04, ready to glaze fire to cone 06)
*** Please order a few extra to accomodate for breakage during shipping and call for availability,
there will be an extra packing charge due to the fragile nature of these tiles.

	BT4 • $2.25 4" Square (actual measure after firing 3.75 ") Qty:
	BT6 • $3.00 6" Square (actual measure after firing 5.875 ") Qty:

Tile Stand

K891 Orton Tile Stands/Setters are rated to be used from cone 06 to 10. A single tile stand is designed to hold up to seven 4" tiles vertically (recommended only for bisque - glaze may run). Use the pair for firing horizontally from cone 06-10. These tile/plate setters are sold as a pair and packaged with foam to prevent damage. Well made, increases firing capacity for flat items like plates and tiles, and saves space.

TS Tile Stands/Setters are rated to be used from cone 06 to 6. These econmical stands will hold five 4" tiles vertically (recommended only for bisque firing - glaze may run). Use the pair for firing horizontally from cone 06-6. These tile setters are sold individually.

K891 Tile setter packaged to prevent damage.	Using one tile setter is only recommended at cone 04 for bisque with either brand.	Best method for firing at all temps (up to cone 10 for K891). Use heavily grogged clays for cone 6-10, to reduce warping of tiles.

All contents related to Georgies' products copyright 2025. All rights reserved.
Georgies Ceramic & Clay Co. • 756 NE Lombard • Portland OR 97211
Phone: 503-283-1353 • Email: info@georgies.com
Store Hours: Monday-Friday 9:00a-5:00p Pacific time • CLOSED Saturday & Sunday