 |
|
Kiln Stilts, Tile Setters, & Firing Wire
Click here to go directly to:
Bar Stilts • Bead & Jewelry Stilts • Bead Bars
High Tripod Stilts • Highfire Stilts • Star Stilts • Stilt Pins
Stilt Rods & Stilt Stones • Tile Setters • Tile Stand • Triangle Stilts
Tile Stand
K891 Orton Tile Stands/Setters are rated to be used from cone 06 to 10.
A single tile stand is designed to hold up to seven 4" tiles vertically (recommended only for bisque - glaze may run). Use the pair for firing horizontally from cone 06-10. These tile/plate setters are sold as a pair and packaged with foam to prevent damage. Well made, increases firing capacity for flat items like plates and tiles, and saves space.
TS Tile Stands/Setters are rated to be used from cone 06 to 6. These econmical stands will hold five 4" tiles vertically (recommended only for bisque firing - glaze may run). Use the pair for firing horizontally from cone 06-6. These tile setters are sold individually.
|
|
|
K891 Tile setter packaged to prevent damage. |
Using one tile setter is only recommended at cone 04 for bisque with either brand. |
Best method for firing at all temps (up to cone 10 for K891). Use heavily grogged clays for cone 6-10, to reduce warping of tiles. |
K891 • $39.00
Stackable Tile/Plate Setter
sold in pairs - fires up to cone 10 |
|
TS • $9.40
Tile Stand/Setter
holds up to 5 tiles - fires up to cone 6 (sold individually)
Buy 1-5 ... |
6-11 ... |
12+ ... |
$9.40 ea |
$8.46 ea |
$7.52 ea |
|
Kiln Stilts
The following stilts are used exclusively in lowfire glaze (cone 04-06) firings, when the piece is completely covered in glaze. The stilt's purpose is to hold the piece off the shelf, so the glaze does not glue the piece to the shelf when it melts. Using High Fire Stilts when firing stoneware or porcelain may cause the piece to deform.
- Choose a stilt, or combine several stilts, if necessary, large enough to evenly support and balance the piece.
- Stilts will leave marks in the fired glaze. The marks' edges may be sharp and should be sanded down.
- Keep the stilts' points clean and sharp to minimize marks.
Jewelry & Bead Stilts
Quantity discounts apply when ordering multiples of the same item number
 |
KA10S - Stilt with 6" Center Rod
3.25" wide, 5 pins per arm
Be aware that metal sags under weight at higher temperatures!
Buy 1 ... |
6-11 ... |
12+ ... |
$7.70 ea |
$6.93 ea |
$6.16 ea |
|
 |
KABR - Small Bead Rack
2" tall x 6" long, with 4 Nichrome Wires
Be aware that metal sags under weight at higher temperatures!
Buy 1 ... |
6-11 ... |
12+ ... |
$29.00 ea |
$26.10 ea |
$23.20 ea |
|
 |
KABT - Bead & Jewelry Tree
8" tall, comes with seven 6" rods
Be aware that metal sags under weight at higher temperatures!
Buy 1-5 ... |
6-11 ... |
12+ ... |
$54.00 ea |
$48.60 ea |
$43.20 ea |
|
Triangle Stilts
Triangle Stilts are used exclusively in lowfire glaze (cone 04-06) firings, when the piece is completely covered in glaze. The stilt's purpose is to hold the piece off the shelf, so the glaze does not glue the piece to the shelf when it melts. Use the size that best fits your ware in size and weight.
Quantity discounts apply when ordering multiples of the same item number
 |
KA.5
3/4" wide, 3 pins
Buy 1 ... |
6-11 ... |
12+ ... |
$1.40 ea |
$1.26 ea |
$1.12 ea |
|
 |
KA1
1" wide, 3 pins
Buy 1 ... |
6-11 ... |
12+ ... |
$1.50 ea |
$1.35 ea |
$1.20 ea |
|
 |
KA2
1-1/4" wide, 3 pins
Buy 1 ... |
6-11 ... |
12+ ... |
$1.60 ea |
$1.44 ea |
$1.28 ea |
|
 |
KA4
1-1/2" wide, 3 pins
Buy 1 ... |
6-11 ... |
12+ ... |
$2.20 ea |
$1.98 ea |
$1.76 ea |
|
 |
KA6
2-1/4" wide, 3 pins
Buy 1 ... |
6-11 ... |
12+ ... |
$2.40 ea |
$2.16 ea |
$1.92 ea |
|
 |
KA8
2-3/4" wide, 3 pins
Buy 1 ... |
6-11 ... |
12+ ... |
$2.70 ea |
$2.43 ea |
$2.16 ea |
|
 |
KA10
3-1/2" wide, 3 pins
Buy 1 ... |
6-11 ... |
12+ ... |
$3.00 ea |
$2.70 ea |
$2.40 ea |
|
 |
KA12
4-1/4" wide, 15 pins
Buy 1 ... |
6-11 ... |
12+ ... |
$7.30 ea |
$6.57 ea |
$5.84 ea |
|
 |
KA14
5-1/4" wide, 15 pins
Buy 1 ... |
6-11 ... |
12+ ... |
$8.40 ea |
$7.56 ea |
$6.72 ea |
|
 |
KA16
7-1/4" wide, 18 pins
Buy 1 ... |
6-11 ... |
12+ ... |
$9.10 ea |
$8.19 ea |
$7.28 ea |
|
Star Stilts
Star Stilts are used exclusively in lowfire glaze (cone 04-06) firings, when the piece is completely covered in glaze. The stilt's purpose is to hold the piece off the shelf, so the glaze does not glue the piece to the shelf when it melts. Use the size that best fits your ware in size and weight.
Quantity discounts apply when ordering multiples of the same item number
 |
KA10-3
3/4" wide, 3 pins
Buy 1 ... |
6-11 ... |
12+ ... |
$1.30 ea |
$1.17 ea |
$1.04 ea |
|
 |
KA9-4
1/4" wide, 4 pins
Buy 1 ... |
6-11 ... |
12+ ... |
$1.50 ea |
$1.35 ea |
$1.20 ea |
|
 |
KA10-4
3/4" wide, 4 pins
Buy 1 ... |
6-11 ... |
12+ ... |
$1.60 ea |
$1.44 ea |
$1.28 ea |
|
Bar Stilts
Bar Stilts are used exclusively in lowfire glaze (cone 04-06) firings, when the piece is completely covered in glaze. The stilt's purpose is to hold the piece off the shelf, so the glaze does not glue the piece to the shelf when it melts. Use the size that best fits your ware in size and weight.
Quantity discounts apply when ordering multiples of the same item number
 |
KA2B
2" Bar with 5 pins
Buy 1 ... |
6-11 ... |
12+ ... |
$2.00 ea |
$1.80 ea |
$1.60 ea |
|
 |
KA3B
3.25" Bar with 7 pins
Buy 1 ... |
6-11 ... |
12+ ... |
$3.30 ea |
$2.97 ea |
$2.64 ea |
|
 |
KA4B
4" Bar with 17 pins
Buy 1 ... |
6-11 ... |
12+ ... |
$4.20 ea |
$3.78 ea |
$3.36 ea |
|
High Tripod Stilts
Quantity discounts apply when ordering multiples of the same item number
 |
KA3H
1-1/2" high, 1-1/8" wide
Buy 1-5 ... |
6-11 ... |
12+ ... |
$2.40 ea |
$2.16 ea |
$1.92 ea |
|
 |
KA6H
1-3/4" high, 1-3/8" wide
Buy 1-5 ... |
6-11 ... |
12+ ... |
$2.70 ea |
$2.43 ea |
$2.16 ea |
|
 |
KA9H
2" high x 2" wide
Buy 1-5 ... |
6-11 ... |
12+ ... |
$3.00 ea |
$2.70 ea |
$2.40 ea |
|
 |
KA10H
3" high x 2-1/8" wide
Buy 1-5 ... |
6-11 ... |
12+ ... |
$4.10 ea |
$3.69 ea |
$3.28 ea |
|
Bead Bars, Stilt Rods & Stilt Stones
Quantity discounts apply when ordering multiples of the same item number
 |
CBBH • Metal Bead Rod
11" long, 1/8" diameter - rated to cone 10, but be aware
that metal sags when it gets hot - support appropriately!
Buy 1-5... |
6-11 ... |
12+ ... |
$13.45 ea |
$10.76 ea |
$9.42 ea |
|
 |
KAPIN ~ $25.95
^06 Stilt Pins
(pkg of 250) |
|
 |
FS305 ~ $22.95
Stilt Mark Stone
LARGE - 1" x 2" x 2.5" |
|
 |
SMS1
Stilt Mark Sander SMALL - 25" x .25" x 4"
Buy 1-5 ... |
6-11 ... |
12+ ... |
$5.25 ea |
$4.20 ea |
$3.68 ea |
|
 |
KASR6 • Stilt Rod
6" long, 10ga, rated to ^6, but be aware that metal sags when it gets hot - support appropriately!
Buy 1-5 ... |
Buy 6-11 ... |
12+ ... |
$5.00 ea |
$4.50 ea |
$4.00 ea |
|
 |
KASR10 • Stilt Rod
10" long, 10ga, rated to ^6, but be aware that metal sags when it gets hot - support appropriately!
Buy 1-5 ... |
Buy 6-11 ... |
12+ ... |
$8.30 ea |
$7.47 ea |
$6.64 ea |
|
|