Oil-based Modeling Clays

Amaco Permoplast

Permoplast is a plastic medium with many uses at every school grade level. For adults, it's equally useful to clay animators, stylists and hobbyists. Sulfur-free, odorless, non-toxic, easily shaped, and permanently plastic. Available in 1 pound or 5 pound blocks

	90058J • $8.10 PermoPlast Cream 1lb	Qty:
	90055F • $8.10 PermoPlast Gray 1lb	Qty:
	90056G • $8.10 PermoPlast Brown 1lb	Qty:

	90078F • $37.50 PermoPlast Cream 5lb	Qty:
	90075C • $37.50 PermoPlast Grey 5lb	Qty:
	90076D • $37.50 PermoPlast Brown 5lb	Qty:

Chavant Modeling Clay

Chavant Fine Art Sculpting Clay, also known as Plasteline, is suitable for students (at all levels) and professionals that create fine art, special effects, or product design work. 2lb blocks are each individually wrapped and can be purchased individually or in cases of 20. It comes in two types: Clayette and NSP. Both are sulfur-free

Non-Fired Crafting Clays

Marblex Air-Dry Clay

This gray, self-hardening modeling clay is prepared in moist form, ready to use for all methods of modeling, including wheel throwing and sculpting. Knead Marblex to increase plasticity before modeling. Allow the finished pieces to dry slowly and evenly on all sides at room temperature, and away from heat, until hard. When completely dry, finished pieces are durable but not waterproof. After decorating, it is a good idea to coat with shellac or varnish to seal it and make it water-resistant.

Mexican Pottery Air-Dry Clay

This red self-hardening modeling clay is prepared in moist form, ready to use for all methods of modeling, including wheel throwing and sculpting. Knead Marblex to increase plasticity before modeling. Allow the finished pieces to dry slowly and evenly on all sides at room temperature, and away from heat, until hard. When completely dry, finished pieces are durable but not waterproof. After decorating, it is a good idea to coat with shellac or varnish to seal it and make it water-resistant.

Sculpting Media

Sculptamold

This material is a white dry, modeling material that combines the best features of clay, plaster and papier mache. It will not shrink and is very durable for 3-D projects, model railroad scenery and decorative objects that are very lightweight, strong. Sculptamold® is AP Non-Toxic.

Shake the closed bag to thoroughly blend contents, add water as directed on bag and begin modeling. Sculptamold® sets in 30 minutes, so prepare only as much as can be used in a half hour of modeling time.

Sculptamold® clings to almost all clean surfaces and can be applied to an armature or any core without fear of cracking. Continue to add Sculptamold® by shaping and modeling layers over the armature. Even though it hardens in half an hour, you can continue to work with it as long as you have to by adding layers of freshly mixed Sculptamold®.

One three-pound bag of Sculptamold® will make roughly 142 cubic inches of solid material. Twelve three-pound bags will make one cubic foot of solid material.

Click here for the PDF that has directions on how to use this material

SC3A • $11.80 Sculptamold (3lb bag)

Qty:

All contents related to Georgies' products copyright 2022. All rights reserved.
Georgies Ceramic & Clay Co. • 756 NE Lombard • Portland OR 97211 • 503.283.1353
Georgies of Eugene • 1471 Railroad Blvd #9 • Eugene OR 97402 • 541.338.7654
Fax numbers: Portland 503.283.1387 • Eugene 541.338.7565
Portland Store Hours: Monday-Friday 9:00a-5:00p Pacific time • CLOSED Saturday & Sunday
Eugene Store Hours: Tuesday-Friday 10:00a-5:00p • Saturday 10:00a-4:00p Pacific time • CLOSED Sunday & Monday