Xiem Tools

Click on the names to go directly to ...

Art Tubes

These Art Tubes are a perfect storage solution! Protect your expensive brushes from damage, keep sharp trimming tools from making cuts you don’t want, and neatly organize all your small and unique tools from getting lost! It’s super light weight and robust, as well as washable. The clear 3”w x 10.25”h tube lets you quickly see what’s inside - a real time-saver! The molded PVC top is designed for quick access to your tools and an air regulated suction bottom provides a tight seal. Xiem will guarantee the lid will not open if it drops on the floor. It’s easy to carry and they are available in lime green and bright orange.

	XATG • $8.95 Art Tube - green Qty:
	XATO • $8.95 Art Tube - orange Qty:

Ultimate Silicone Texture Combs

Xiem Ultimate texture combs are great for creating lines and strips of different width to produce various 3 dimensional texture effects on malleable surface including clay, thick slip, under-glaze, engobes, paint, stucco and gel mediums. These tools are made with silicone to ensure to last a lifetime. To use them, just pull them in straight, wavy, crisscross, or circle lines -- or anyway you like! -- over your choice of mediums to create your own designs.

	UTCAS • $11.95 Ultimate Soft Texture Combs Set A Qty:
	UTCBS • $11.95 Ultimate Soft Texture Combs Set B Qty:
	UTCAF • $11.95 Ultimate Firm Texture Combs Set A Qty:
	UTCBF • $11.95 Ultimate Firm Texture Combs Set B Qty:

Rigid Ribs

These polypropylene ribs are great for shaping, smoothing and finishing clay in tight areas. They're also great for detail work. The thermoplastic polymer material provides strength and rigidity, and it's resistant to fatigue. To clean them, wash with soap and water, then blot dry.

	PCR1 • $5.95 Rigid Rib PCR1(3" long x 1.4" wide)
	Qty:
	PCR2 • $5.95 Rigid Rib PCR2(2.9" long x 1.6" wide)
	Qty:
	PCR3 • $5.95 Rigid Rib PCR3(3.7" long x 1.65" wide)
	Qty:
	PCR4 • $5.95 Rigid Rib PCR4(2.9" long x 1.6" wide)
	Qty:
	PCR5 • $5.95 Rigid Rib PCR5(4.25" long x 2.2" wide)
	Qty:
	PCR6 • $5.95 Rigid Rib PCR6(4.6" long x 2.5" wide)
	Qty:
	PCR7 • $6.95 Rigid Rib PCR7(5.9" long x 2" wide)
	Qty:
	PCR8 • $6.95 Rigid Rib PCR8(5.7" long x 2" wide)
	Qty:

Silicone Potters' Ribs

Xiem Tools' new silicone rubber throwing ribs have a perfect "feel" in your hand: they fit just right! With 3 different stiffnesses and 11 shapes to work with, you may not need anything else. They are great for working with a variety of forms in wheelthrowing or handbuilding techniques. To clean them, wash with soap and water, then blot dry.

	SCRS • $6.50 Ultra Soft Small Chartreuse Silicone Rib Great for shaping, smoothing and finishing clay in tight areas. Also great for detail work. 3.125" w x 1.5" h Qty:
	SCRM • $6.50 Ultra Soft Medium Chartreuse Silicone Rib Great for shaping, smoothing and finishing clay in tight areas. Also great for detail work. 4" w x 1.75" h Qty:
	SCRL • $6.95 Ultra Soft Large Chartreuse Silicone Rib Great for shaping, smoothing and finishing clay in tight areas. Also great for detail work. 4.875" w x 2" h Qty:
	SCR1-O • $6.50 Soft Silicone Rib #1 Best used for shaping, smoothing and finishing clay in tight areas. Also great for detail work. Measures 3" w x 1.4" h Qty:
	SCR2-O • $6.50 Soft Silicone Rib #2 Best used for shaping, smoothing and finishing clay in tight areas. Also great for detail work. Measures 2.9" w x 1.6" h Qty:
	SCR3-O • $6.50 Soft Silicone Rib #3 Great for throwing, shaping and finishing small bowls and vases. Also good for smoothing and handbuilding. Measures 3.7" w x 1.65" h Qty:
	SCR4-O • $6.50 Soft Silicone Rib #4 Great for throwing, shaping and finishing small bowls and vases. Also good for smoothing and handbuilding. Measures 2.9" w x 1.6" h Qty:
	SCR5-O • $6.50 Soft Silicone Rib #5 A must-have rib in your tool box. Classic and essential for all your clay work. One of Xiem's most useful ribs. Measures 4.25" w x 2.2" h Qty:
	SCR6-O • $6.50 Soft Silicone Rib #6 Great for shaping both interiors and exteriors of larger bowls, plates and vases. Two round ends are for the neck and detail work. Measures 4.6" w x 2.5" h Qty:
	SCR7-O • $7.50 Soft Silicone Rib #7 Useful in creating larger flange vases, bowls and platters. Also is a great tool for smoothing flat slabs of clay. Measures 5.9" w x 2" h Qty:
	SCR8-O • $7.50 Soft Silicone Rib #8 Essential for classic low-profile bowls and platters. Also good for short and tall cylinders. Measures 5.7" w x 2" h Qty:
	SCR1-B • $6.50 Firm Silicone Rib #1 Best used for shaping, smoothing and finishing clay in tight areas. Also great for detail work. Measures 3" w x 1.4"h Qty:
	SCR2-B • $6.50 Firm Silicone Rib #2 Best used for shaping, smoothing and finishing clay in tight areas. Also great for detail work. Measures 2.9" w x 1.6" h. Qty:
	SCR3-B • $6.50 Firm Silicone Rib #3 Great for throwing, shaping and finishing small bowls and vases. Also good for smoothing and handbuilding. Measures 3.7" w x 1.65" h Qty:
	SCR4-B • $6.50 Firm Silicone Rib #4 Great for throwing, shaping and finishing small bowls and vases. Also good for smoothing and handbuilding. Measures 2.9" w x 1.6"h Qty:
	SCR5-B • $6.50 Firm Silicone Rib #5 A must-have rib in your tool box. Classic and essential for all your clay work. One of Xiem's most useful ribs. Measures 4.25" w x 2.2" h Qty:
	SCR6-B • $6.50 Firm Silicone Rib #6 Great for shaping both interiors and exteriors of larger bowls, plates and vases. Two round ends are for the neck and detail work. Measures 4.6" w x 2.5" h Qty:
	SCR7-B • $7.50 Firm Silicone Rib #7 Useful in creating larger flange vases, bowls and platters. Also is a great tool for smoothing flat slabs of clay. Measures 5.9" w x 2" h. Qty:
	SCR8-B • $7.50 Firm Silicone Rib #8 Essential for classic low-profile bowls and platters. Also good for short and tall cylinders. Measures 5.7" w x 2" h Qty:

Texture Rib Sets

The ultimate decorating tools! Each set has 4 different patterns with 3 different sizes (of the same pattern) on each rib. Combining sets opens up for endless possibilities and fun.

They are perfect for adding 3-D detail to ceramics, glass, cakes, canvas and walls. Use them to texture any malleable surface including clay, thick slip, underglaze, engobe, icing, think paint, gel mediums, glue, plaster and putty. Pull to make straight or wavy lines, crisscross them, or create your own over the malleable surface to create beautiful custom designs.

-- Click on the above images for a large detail view --

	UDRAS • $13.95 Soft Texture & Decorating Ribs Set A Qty:
	UDRBS • $13.95 Soft Texture & Decorating Ribs Set B Qty:
	UDRCS • $13.95 Soft Texture & Decorating Ribs Set C Qty:
	UDRA • $13.95 Texture & Decorating Ribs Set A Qty:
	UDRB • $13.95 Texture & Decorating Ribs Set B Qty:
	UDRC • $13.95 Texture & Decorating Ribs Set C Qty:

Steel Ribs

These stainless steel clay ribs are flawless, flexible, and the finest steel ribs available. Tailored for all your shaping, trimming, cutting, smoothing and finishing needs on leather, water-based and oil-based plastalines, Polymer clays, waxes, plaster, and of course - clays. Both ribs are 5.2" long x 1.7" wide.

	SSR1A • $3.75 (2.4" x 1.2") Smooth Steel Rib Qty:
	SSR1B • $4.95 (2.8" x 1.4") Smooth Steel Rib Qty:
	SSR1C • $4.95 (4" x 1.8") Smooth Steel Rib Qty:
	SSR2A • $3.75 (2.4" x 1.2") Smooth Steel Rib Qty:
	SSR2B • $4.95 (3" x 1.4") Smooth Steel Rib Qty:
	SSR2C • $4.95 (4" x 1.8") Smooth Steel Rib Qty:
	SSR3A • $3.75 (2.4" x 1.2") Smooth Steel Rib Qty:
	SSR3B • $4.95 (3" x 1.4") Smooth Steel Rib Qty:
	SSR3C • $4.95 (4" x 1.8") Smooth Steel Rib Qty:
	SSR4A • $4.95 (5.2" x 1.7") Serrated Steel Rib Qty:
	SSR4B • $4.95 (5.2" x 1.7") Smooth Steel Rib Qty:

Texture Art Rollers

Discover the unlimited possibilities of pattern and texture with these great new Art Rollers! Each 7" roller is made of high-quality nonstick rubber and is easily interchangeable with the stainless steel-&-hardwood handle. These rollers offer seamless pattern designs, sturdy and construction, and they're designed and assembled in the US. The rollers work equally well with or without the ARH handle.

ARH Art Roller Handle $6.95 Qty:

	AR1 Baroque Art Roller $12.95 Qty:
	AR2 Bamboo Art Roller $12.95 Qty:
	AR6 Stucco 1 Art Roller $112.95 Qty:
	AR8 Woodgrain Art Roller $112.95 Qty:
	AR9 Nami Waves Art Roller $12.95 Qty:
	AR16 Crackle Art Roller $12.95 Qty:
	AR23 Vertical Lines Art Roller $12.95 Qty:
	AR25 Key Fret Art Roller $12.95 Qty:
	AR28 Stucco 2 Art Roller $12.95 Qty:
	AR30 Chrysanthemum Art Roller $12.95 Qty:

Create. Roll. Done! Xiem's extended Art Roller Detailing family includes eleven exciting patterns give you the wow factor that you have been searching for in your artwork. They are great for adding texture to a variety of clays such as polymer, sculpey, earthenware, precious metal, and stoneware clays. Now you can effortlessly add a seamless line of texture to any project. Discover the unlimited possibilities! Each roller is 1/2" wide.

	ARD01 • $18.50 Detail 1	Qty:
	ARD03 • $18.50 Detail 1	Qty:
	ARD05 • $18.50 Detail 5	Qty:
	ARD06 • $18.50 Detail 6	Qty:
	ARD08 • $18.50 Detail 8	Qty:
	ARD11 • $18.50 Detail 11	Qty:

Mini Art Rollers

Art Roller Minis have interchangeable rubber rollers with different designs. NO strips to wrap around and secure (somehow) to the wheel: just slide rollers on and off the handle. Roll them in any direction on any surface, including curves, for continuous lines of pattern. Actual pattern size is 1" wide

Four sets available: each set includes handle and 3 pattern wheels.

Set B ARMB • $17.95 Qty: >>>
	Set C ARMC • $17.95 <<< Qty:
Set D ARMD • $17.95 Qty: >>>

Xiem Measuring Devices

Flexible 16" Ruler

Potter's Clay Gauge

A handy Caliper and depth measurement tool in one. It is ideal for measuring inner, outer, and depth measurements for both thrown and hand-built clay works with precision. It provides dimension in inches and centimeters. PCG • $5.95 Potter's Clay Gauge Qty:

Xiem Attachable Letters

These stamps are attachable and easy to snap together to create words or phrases. Never
worry about lining up letters again! Words or phrases can be lined up either horizontally or vertically to suit your creative needs. Great with ink, paint, clay, and underglazes. All sets
are 3/8" high x 1/4" wide.

Foot Shapers

Each size has a sharp pointed angle on one end for cutting, slicing, scraping, and trimming the bottom of pots while on the wheel. The other end has a smooth concave edge to create a consistent foot on your pots. Made of the finest Beechwood and handcrafted by well-trained artisans to ensure the highest quality at an affordable price. Each Foot Shaper is 8" long.

Foot Maker

Xiem Foot Maker is an indispensable tool to add a foot or decorative details. Two blunt prongs are made of stainless steel designed to cut beveled strips of clay and can be easily adjustable to fit your desired width to form a foot with ease without damaging the surface below. The opposite end is made of flexible, firm silicone that has a concave center to allow artists to compress the beveled foot into a perfect uniform foot and smooth the edges efficiently in a single stroke. It is also perfect for rounding the top rim; plus the radii on the sides are excellent for finishing the details.

Teapot Spout Makers

Xiem Teapot spout makers make perfect form-fitting spouts for any shape and size teapot. Just wrap a clay slab around one of the taper tool-ends, join the two sides, and smooth the seam. Once stiff, it can be modified, cut, and attached to the pot. It is made of solid hard beech wood, hand-sanded, and was applied a quick coat of pure tung oil to prevent molds, termites, water, and deterioration from the weather over time. Available in two practical sizes-- small and medium. Each size has a short classic tapper shape and an extended taper shape on the opposite end. Also an excellent tool to make feet and decorative elements.

Cutting, Carving & Stylus Tools

Angled Wire Bevel Cutter

XB - $10.95 Qty:

Cutting Wires

The Pro-Cutting Wires are designed to optimize your cutting ability and eliminate the chances of the wire getting tangled in your tool boxes. The ideal Pro-Cutting wire has an 11” wire and is perfect for beginners and artists who prefer to create small to medium work so they don’t have to wrap the wire around their fingers. Each Pro-Cutting Wire is housed in a clear case to contain the wire and reduce crimping.

	PCW11 • $7.50 Potter's Cutting Wire - 11" Qty:
	PCW13 • $7.50 Potter's Cutting Wire - 13" Qty:
	PCW13W • $7.50 Potter's Cutting Wire - Wavy 13" Qty:
	PCW19 • $7.50 Potter's Cutting Wire - 19" Qty:

X-Shred Clay Shredder

The X-SHRED is a shredder tool with a long blade and confortable handle, ideal for removing leatherhard clay or plaster with ease. This is the potter's #1 choice for shaping and refining clay and plaster! The X-Shred is comfortable and lightweight and neatly collects and holds shavings. It is fitted with sharp tempered steel blades, which are easily replaceable with a quick release knob - no tools required. Replacement blades are also available.

XS - Clay Shredder	XSB - Replacment Blade
$9.95 Qty:	$4.95 Qty:

Sanding Sticks

Xiem double-sided and washable Sanding Sticks are made from aluminum oxide grit on a firm backing. No sanding block is needed. They’re perfect for sanding, shaping, refining, and finishing a variety of surfaces and materials such as woods, plastics, acrylics, alabasters, and ceramics - both for green- and bisque-wares. Each package has a set of TWO that are 1.25“ wide x 7” long. Available in fine, medium, and coarse grit for regular clay and porcelain.

	SAND01 • $2.95 Sanding Stick - fine Qty:
	SAND02 • $2.95 Sanding Stick - medium Qty:
	SAND03 • $2.95 Sanding Stick - coarse Qty:
	SAND04 • $2.95 Sanding Porcelain Stick - Fine Grit Qty:
	SAND05 • $2.95 Sanding Porcelain Stick - Medium Grit Qty:
	SAND06 • $2.95 Sanding Porcelain Stick - Coarse Grit Qty:

Silicone Tool Sets

These Clay Finishing Tools are revolutionary tools with double-head tips for sculpting, blending, and finishing clay surfaces with confidence. They are indispensable for hand-building and sculptural clay work, and are also excellent for texturing clay surfaces. Designed and engineered for efficiency, accuracy, and dependability. They are made of pliable silicone material, resistant to extreme temperature, cracking, and deterioration. Available medium and small double-head tip sets, both in either flex-firm or strong-firm.

	FFS • $21.95 Flex-Firm Silicone Tools - Small Set of 5 with double tips Qty:
	FFM • $23.95 Flex-Firm Silicone Tools - Medium Set of 5 with double tips Qty:
	SFS • $21.95 Strong-Firm Silicone Tools - Small Set of 5 with double tips Qty:
	SFM • $23.95 Strong-Firm Silicone Tools - Medium Set of 5 with double tips Qty:

Stainless Steel Ball Styluses

Xiem's new Ball Stylus tools are excellent for sgraffito, embossing, marking, tracing, writing, transferring patterns, or incising greenware. Each tool is made from high-grade stainless steel and crafted into a single robust tool with a precise ball on each end. They are set in bright color rubber for secure gripping and are easy to find. Made without glued or assembled parts, these tools are designed to last.

Griffon Hook Tools (hand-forged)

These double-end tools are available in three sizes of hooks with sharp, serrated teeth in each end. They are made from high-grade stainless steel and hand-forged to create a one-piece tool. Set in bright-colored rubber for comfort and secure gripping, they are great for scraping, texturing, refining, shaping and removing clay with control.

Needle & Scoring Tool (hand-forged)

Two tools in one! Each tool is made from high-grade stainless steel and hand-forged to create a solid tool with a sharp needle on one end and a scoring tool on other end. Set in bright color rubber for a comfortable, secure grip, and they won’t roll off the table. They are also great for cutting, scoring, removing clay and all your hand-building needs. Since there are no glued or assembled parts, these tools made for life and a great value.

Fettling Knife & Scoring Tool (hand-forged)

Two tools in one! The tools are made from high-grade stainless steel and hand-forged to create a solid tool with a fettling knife on one end and a scoring tool on other end. Set in bright color rubber for a comfortable, secure grip, and they won’t roll off the table. The knife end is rigid and has a fine edge for cutting, while the toothed edge is useful for scoring, removing clay and all your hand-building needs. Since there are no glued or assembled parts, these tools made for life and a great value.

Retractable Scoring Tool

XST39 • $7.50 Retractable Scoring Tool with 6 pins (3.25") Qty:

Porcelain Cutoff Needle

The right tool for the right job? This fine needle tool is perfect for those times you need a sharp, smooth, clean, delicate cut to remove the uneven top rim of a fine porcelain piece on your wheel. Made from surgical stainless steel to ensure sharpness, they are strong and long lasting. The faceted handle, set in rubber for a comfortable and secure grip, will not roll off the table.

Stoneware Cutoff Needle

This robust needle tool is designed to remove thick, uneven rims of coarse clay bodies on the pottery wheel. Each tool is made from a solid piece of surgical stainless steel to ensure sharpness and quality for life. The sharply pointed needle cuts through thick clay quickly and smoothly, while the broader base of the needle helps to separate and split clay away with ease, avoiding bending and breaking. The faceted handle, with inset rubber for comfort and secure grip, won't roll off the table.

Sculpting Tool Sets

Ribbon Tool Set

Ribbon Blades are made from fine tempered steel with an aluminum handle covered with soft rubber neon grips. Use for sculpting, carving, trimming, texturing and detailing on waterbased clays, wax, plaster and polymer clays. Nine different tools are included to meet all of your design needs.

Ribbon Blades are made from fine tempered steel with an aluminum handle covered with soft rubber neon grips. Each set offers a variety of shapes to help perfect your design. Use for sculpting, carving, trimming, texturing and detailing on waterbased clays, wax, plaster and polymer clays.

Wire Sculpting Set

Each tool is hand-crafted to ensure a precise cutting edge, and has rubber handles for ease of use and comfort. The image at left is foreshortened to show more detail of the working ends. Click on the image for a view of the actual shape. WSS • $19.95 Wire Sculpting - set of 3 Qty:

Carving Tool Sets

Ribbon Blades are made from fine tempered steel with an aluminum handle covered with soft rubber neon grips. Each set offers a variety of shapes to help perfect your design. Use for sculpting, carving, trimming, texturing and detailing on waterbased clays, wax, plaster and polymer clays. Click on the image at left to see a larger image of the tools.

Carving & Sculpting Set

This set offers a wide variety of shapes for basic clay carving and modeling. Many of these tools allow you to refine forms to your exact needs and can be sharpened. Each tool is double-ended and handcrafted from high-quality stainless steel to ensure a precise cutting edge. The green rubber handles are easy to find and provide a comfortable, secure grip. Without glue or assembled parts, these tools are made for life.

-- The handlesabove are foreshortened for space and to show the tools' working ends better --
-- Click on the image above for the actual shape --

Modeling & Carving Set

All the right tools for your modeling and carving needs--a fantastic addition to your tool kit! All are made from solid high-grade stainless steel and handcrafted in a variety of essential shapes and contours for intricate modeling, carving, shaping and clay removal. The bright red rubber ensures secure gripping and makes it fun to use and easy to find. These tools are made to last a lifetime and can be sharpened.

-- The handles above are foreshortened for space and to show the tools' working ends better --
-- Click on the image above for the actual shape --

Sgraffito & Detailing Set

The seven most practical and versatile tools for your sgrafitto and detailing needs. All are made from solid high-grade stainless steel and hand-crafted in a variety of popular shapes with precise cutting edges. With a rubber handle for a comfortable, secure grip, these tools are also great for intricate carving, cutting, and refining of detail.

-- The handles above are foreshortened for space and to show the tools' working ends better --
-- Click on the image above for the actual shape --

Fluting Tool Set

This set has 3 different ultra sharp titanium coated cutlery stainless steel grade precision fluting blade sizes (S,M,L). Each tool has an angled blade designed to provide consistent depth with smooth, even cuts. Blades are easy to change and have an ergonomic handle for maximum comfort and flat bottom to keep tool from rolling off your table. Ideal for cutting on leather hard clay. Wash with water and blot dry.Blades can be re-sharpened with a round metal file; hold the blade upside down, file only in a forward direction, until sharp.

XFTS • $20.95 Stainless Steel Fluting Tool Qty:

Scratch Pens

The Scratch Pen is an excellent and useful tool for incising and excising a design directly on leather-hard clay projects. The double-end interchangeable wire tips are made of high-strength stainless steel wire for long-lasting performance while the soft silicone handle is comfortable and a pleasure to use.

Trimming Tool Set

This set has 6 different sharp precision trimming blades. Each handcrafted tool is double- ended and made from a solid piece of high-grade tempered stainless steel for your delicate porcelain trimming needs. Bright yellow rubber handles ensure a secure grip, are fun to use and easy to find. Tools can be sharpened.

XST • $35.95 Stainless Steel Trimming Tools Qty:

Xiem Detail Carving Tools

Korean Atelier Detailing Carving Tools that are made from tempered high-carbon steel with a
Titanium coating that is fused for maximum performance. Excellent for delicate carving and
detailing on porcelain clay, wax, all forms of metal clays, and polymer clays. Designed here in
the USA to be 3x harder than regular steel blades.

XST33 • $35.95 Detail Carving Tool - set of 4 Qty:

XST29 • $9.95 Flat Hook Trimmer Tool Qty:

XST30 • $9.95 Angled Hook Trimmer Tool Qty:

XST31 • $9.95 Round Hook Trimmer Tool Qty:

XST32 • $9.95 Knife Blade Trimmer Tool Qty:

Sponges

Foam Brush Kits

Xiem's foam brushes are made from the highest-quality foam and secured on a plastic handle for wax-resist application on pottery. Also excellent for oxides, stains, inks, and glazes in hard-to-reach areas. Small are 1/4" x 4", medium are 1/2" x 4.8".

Telescoping X-Sponge

Not your ordinary "sponge-on-a-stick": The stainless steel rod telescopes from a shallow 8.5" all the way to 23" long to reach the deepest parts of your work. Never have to deal with water out of reach at the bottom of your work again. The stainless steel telescoping handle and replaceable sponge heads have matching threading so you can swap them out with practically no effort at all.

STS • Slim Telescoping Sponge • $14.25 Qty:	ST • Telescoping Sponge • $14.25 Qty:
STSR • Replacement Heads • $9.50 Qty:	STR • Replacement Heads • $9.50 Qty:

Sponges

An extremely soft, super absorbent and long-lasting chamois sponge. Tapered edges give fine control for working with either porcelain or stoneware clay. Use the finishing sponge for adding final refinements to any clay body.

Heavy Duty Clay Sponge

Clay Sponge For All Clay Bodies (2 per pack). Soak the sponge in water and wring it out. Repeat a couple of times before use. Returns to its original form when dry and remains soft.

Slip & Glaze Detailing

Precision Applicator & Slip Trailing Tips

The Precision Applicator is a true innovation in ceramic glazing,slip-trailing, fine detailing, writing, wax-resisting, painting and any other liquid decorating technique you can dream up! Set includes 3-ounce rubber bulb and 4 applicator needles.

The Easy Suction Adapter quickly converts the bulb for general purpose suction so you can fill up the bulb easily with liquid glazes and underglazes directly from any size container without spills. Use the adapter directly to apply the liquid, or change over to one of the four needle sizes. Sold separately: not included with the Precision Applicator.

	PA.1 • $21.50 Small Precision Applicator Qty: (This is the 1-ounce small rubber bulb. Tips from this set can be used with the 3-ounce rubber bulb too: they both use the same screw-on nickel-plated fitting.)
	PA • $23.95 Large Precision Applicator Qty: (This is the 3-ounce small rubber bulb. Tips from this set can be used with the 1-ounce rubber bulb too: they both use the same screw-on nickel-plated fitting.)
	ESA • $3.25 Easy Suction Adapter Qty: The Easy Suction Adapter quickly converts the bulb for general purpose suction so you can fill up the bulb easily with liquid glazes and underglazes directly from any size container without spills. Use the adapter directly to apply the liquid, or change over to one of the four needle sizes. Sold separately: NOT INCLUDEED with the Precision Applicator.

PAT14 • $1.95 14-gauge Applicator Tip	Qty:
PAT16 • $1.95 16-gauge Applicator Tip	Qty:
PAT18 • $1.95 18-gauge Applicator Tip	Qty:
PAT20 • $1.95 20-gauge Applicator Tip	Qty:

CLA • $5.75 Cap Lock for Precision Applicator Qty:

PATC • $3.25 Applicator Tip Cover - Cap Fit Qty:

Applicator Bottles

Purchase individally or as a set. The set includes 4 bottles (one of each size) with cap connectors, tips, cap locks, 10 labels, 2 pin sizes, and 4 bonus precision tip caps.

Xiem Clay Paddles

Xiem Clay Paddles are designed to solve simple solutions to shape, form, and compress clay like no other. They are handcrafted from solid beech wood for a lifetime of use. The flat side is excellent for shaping, forming, and flatting irregularities on the surface and to add strength, stability, and alter wheel forms and hand-built clay works. It is also an indispensable tool for the sculpture artist. The convex side is great for compressing clay and knocking out the air bubbles. The handles are covered with soft foam rubber grip for uttermost comfort and a pleasure to use.

XCPM • $12.75 Clay Paddle Medium 9.5" x 1.9" x .4" Qty:

XCPL • $13.95 Clay Paddle Large 11.25" x 2.5" x .75" Qty:

Xiem Dot Clay Level & Trimming Wheel

The Dot is a clay level and trimming wheel in one. The clay level was designed to help with leveling clay work on a bisque trimming chuck or any trimming support before trimming. The trimming wheel is designed to hold down the greenware pottery on the wheel for ease of trimming needs. It is made with precision-machined aluminum wheels and stainless-steel ball bearings for smooth rotation. 2" wide x ½" thick

Xiem Marking Dots

Marking Dots are a clear plastic decorating disk and trimming wheel in one. The disk has measurements around the circumference for marking divisions, including the most popular even and odd spacing. It is made with precision-machined aluminum wheels and stainless-steel ball bearings for smooth rotation. Available in 3 sizes.

All contents related to Georgies' products copyright 2025. All rights reserved.
Georgies Ceramic & Clay Co. • 756 NE Lombard • Portland OR 97211
Phone: 503-283-1353 • Email: info@georgies.com
Store Hours: Monday-Friday 9:00a-5:00p Pacific time • CLOSED Saturday & Sunday